KO TECHNOLOGIES- CUSTOM DRIVE TRAIN AND BRUSHLESS MOTOR DESIGN.
INDUSTRY LEADING FIRST PERSON VIEW MOTORS
Our FPV motors boast a whole range of technical achievements and industry firsts
COLOURED WINDINGS
CRYO STATOR
The Method range of motors al come with a removable base plate that can be easily switched out if required. This also doubles up as a sump for RaceX oil.
Every KO FPV motor now comes with a specially formulated covering over the stator meaning that it is compatible with our cryo technology spray.
CRYO TECHNOLOGY - RACE OIL X - ACPC - OPEN CAGE BEARINGS - REMOVABLE BASE PLATE - WET SUMP - COLOURED WINDINGS
Demon Speed 2208.5 Motor available in various KV.
The Demon Speed motor offers great value with a unique coloured hand wind.
2208.5
Available in 1850. 2050 and 2540KV
MOTOR WEIGHT
40g with 4cm wires
(using Miniquad Test Bench standards).
HAND WOUND
14 Pole hand wound stator maximising the amount of copper used.
QUAITY AND COLOURED WINDINGS AT AN AFFORDABLE PRICE
MOTOR FEATURES 2307.5 - VARIOUS KV
16 X 16 BOLT PATTERN FOR EASY FITTING RACE DRONES.
CNC ANTI PROP
SLIP DESIGN.
SINGLE STRAND HAND WOUND STATOR WITH THE HIGHEST QUALITY WINDINGS.
ACTIVE CHOKE POINT TECHNOLOGY (PATENTED) TO IMPROVE COOLING ON THE STATOR DURING FLIGHT.
UNIQUE CRYO STATOR COATING (PATENTED) MAKING THE STATOR RESISTANT TO EXTREME CHANGES OF TEMPERATURE.
N52SH HIGH QUALITY
MAGNETS.
7075 ALUMINIUM HIGH
QUALITY BASE DESIGN.
FULL SPECIFICATION
MAGNET
N52SH MAGNETS
BEARING
EZO 9X4X4
STATOR LAMINATE
0.15 NIKKON JAPANESE STEEL
SHAFT
HOLLOW TITANIUM
WEIGHT
40G
WIRE LENGHTH
160MM
VOLTAGE
4-6S
Please email ben@ko-technologies.com for more information regarding this motor.
WIRE AWG
20AWG
BELL MATERIAL
7075 ALUMINIUM
BASE MATERIAL
7075 ALUMINIUM
WIND INFO
220 DEGREE 99.9% PURE COPPER, 14 POLE
COOLING
ACTIVE CHOKE POINT COMPRESSION
WINDING QC
TEST TO 500VOLT @ LOW AMPS
BALANCE
QC
DUAL STAGE DYNAMIC TEST FOR EACH BELL
KO MOTORS UNIQUE DESIGN QUEUES
Unique design and styling that is unmatched in the FPV industry
Each Method motor has a built in chamber "wet sump" precisely engineered to hold a small amount of RACEX OIL. This feeds into the open case bearings via the patented KO orga main shaft.
​
While we use the very best EZO bearings possible there is still room for improvement and efficiency. This is achieved by adding a thin layer of RACEX OIL delivered by the orga pump. This gives the bearings a higher degree of tolerance for a highly balanced motor.
​
​
See more
Each Method motor has been design and developed to work with our very own patented Cryo Technology. This includes a special covering on the stator to negate the effect of subjecting it to minus temperatures.
​
Cryo technology was developed to improve the peak operating envelope of the motor whilst delivering an initial power increase of up to 15% depending on ambient temperature conditions.
REMOVABLE BASE PLATE
With integrated wet sump and machined orga pump which draws oil into the bearings. This reduces friction and helps to dissipate heat.
​
OPEN CAGE BEARINGS
Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak.
​
ACTIVE CHOKE POINT
KO Technologies has developed ACPC to compress oncoming air directly at the bell spoke face, forcing the air past the spokes and directly into the stator and magnet assembly..
​
CRYO TECHNOLOGY
Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak.
​