top of page

MOTOR FEATURES

method r cut out 3.png
race-car-1031767.jpg

THE ULTIMATE FPV RACING MOTOR FOR 5 +6 INCH

method r cut out 2.png
ko red.png
method r cut out 1.png
method r name.png
method r cut out 4.png
  • Facebook
  • Instagram

INDUSTRY LEADING FIRST PERSON VIEW MOTORS

Our FPV motors boast a whole range of technical achievements and industry firsts

method r cut out 4.png
cryo motor2.png
bearing.png

REMOVABLE BASE PLATE

CRYO STATOR

OPEN CAGE BEARINGS

The Method range of motors al come with a removable base plate that can be easily switched out if required. This also doubles up as a sump for RaceX oil.

Every KO FPV motor now comes with a specially formulated covering over the stator meaning that it is compatible with our cryo technology spray.

All of our Method range come with open cage EZO bearings as standard, giving the smoothest possible operation and significantly reducing friction. 

CRYO TECHNOLOGY - RACE OIL X - ACPC - OPEN CAGE BEARINGS - REMOVABLE BASE PLATE - WET SUMP - COLOURED WINDINGS 

The Method R 2207.5 Motor available in various KV.

Designed from scratch to be the ultimate race motor, unmatched power and torque with ultra smooth operation.

2207.5

method r cut out 1.png

Available in 1850 and 2000KV

MOTOR WEIGHT

method r cut out 2.png

35g with 4cm wires

(using Miniquad Test Bench standards).

HAND WOUND

method r cut out 3.png

14 Pole hand wound stator maximising the amount of copper used.

CUSTOM MADE AND DESIGNED TO FREESTYLE

methodf 5.png
method r cut out 1.png
method r name.png
SMALL COLD SPRAY.png
SMALL COLD SPRAY.png
OIL.png
OIL.png
CRYO.png
RACE OIL.png

MOTOR FEATURES 2307.5 - VARIOUS KV

method r name.png
planet-2638122.jpg
method r cut out 3.png
method r name.png
method r cut out 1.png

BUILT IN ORGA PUMP TO DRAW OIL INTO THE BEARING AIDING COOLING AND EFFICIENCY.

REMOVABLE SCREW ON BASE PLATE WITH EASY SUMP ACCESS FOR QUICK DISASSEMBLY AND OIL CHANGES.

16 X 16 BOLT PATTERN FOR EASY FITTING RACE DRONES.

SILICON SUMP PLUG FOR EASY ACCESS TO THE BEARINGS AND OIL CHANGES.

CNC ANTI PROP 

SLIP DESIGN.

MULTI STRAND HAND WOUND STATOR WITH THE HIGHEST QUALITY WINDINGS.

ACTIVE CHOKE POINT TECHNOLOGY (PATENTED) TO IMPROVE COOLING ON THE STATOR DURING FLIGHT.

UNIQUE CRYO STATOR COATING (PATENTED) MAKING THE STATOR RESISTANT TO EXTREME CHANGES OF TEMPERATURE. 

N52SH HIGH QUALITY

MAGNETS.

7075 ALUMINIUM HIGH

QUALITY BASE DESIGN.

KO UNIQUE TITANIUM

HALF SHAFT DESIGN

freestyle.png

UNIQUE OPEN CAGE 

BEARING DESIGN TO

BE USED WITH OIL FOR

MUCH IMPROVED COOLING

FULL SPECIFICATION

method r name.png
highway-2025863.jpg
SMALL COLD SPRAY.png
SMALL COLD SPRAY.png

MAGNET

N52SH MAGNETS

BEARING

EZO 

STATOR LAMINATE

0.15 NIKKON JAPANESE STEEL

SHAFT

HOLLOW TITANIUM

WEIGHT

37G

WIRE LENGHTH

160MM

VOLTAGE

4-6S

Please email ben@ko-technologies.com for more information regarding this motor.

WIRE AWG

22 AWG

BELL MATERIAL

7075 ALUMINIUM

BASE MATERIAL

7075 ALUMINIUM

WIND INFO

220 DEGREE 99.9% PURE COPPER, 10 POLE 2Y.

COOLING

ACTIVE CHOKE POINT COMPRESSION

WINDING QC

TEST TO 500VOLT @ LOW AMPS

BALANCE

QC

DUAL STAGE DYNAMIC TEST FOR EACH BELL

method r cut out 1.png
method r cut out 2.png

KO MOTORS UNIQUE DESIGN QUEUES

Unique design and styling that is unmatched in the FPV industry

ko red.png

BUY IN EU

SHIPPING DIRECTLY OUT OF EUROPE.

BUY IN USA

SHIPPING TO THE UNITED STATES DIRECT

FROM SILICON VALLEY.

australia-1157502_1920.jpg

BUY IN

AUSTRALIA

SHIPPING TO AUSTRALIA DIRECT

FROM THE GOLD COAST.

OIL.png
RACE OIL.png

Each Method motor has a built in chamber "wet sump" precisely engineered to hold a small amount of RACEX OIL. This feeds into the open case bearings via the patented KO orga main shaft. 

​

While we use the very best EZO bearings possible there is still room for improvement and efficiency. This is achieved by adding a thin layer of RACEX OIL delivered by the orga pump.  This gives the bearings a higher degree of tolerance for a highly balanced motor. 

​

​

See more

SMALL COLD SPRAY.png
CRYO.png

Each Method motor has been design and developed to work with our very own patented Cryo Technology. This includes a special covering on the stator to negate the effect of subjecting it to minus temperatures. 

​

Cryo technology was developed to improve the peak operating envelope of the motor whilst delivering an initial power increase of up to 15% depending on ambient temperature conditions. 

REMOVABLE BASE PLATE

xclass 2.png

With integrated wet sump and machined orga pump which draws oil into the bearings. This reduces friction and helps to dissipate heat.

​

bearing.png

OPEN CAGE BEARINGS

Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak. 

​

demon seed.png

ACTIVE CHOKE POINT

KO Technologies has developed ACPC to compress oncoming air directly at the bell spoke face, forcing the air past the spokes and directly into the stator and magnet assembly.. 

​

CRYO TECHNOLOGY

BLUE STATOR.png

Our Method range of motors all use open bearings. This dramatically reduces friction and helps prevent heat soak. 

​

bottom of page